Access Old Hard Drive Files with This Data Recovery Converter

Your old hard drive sits in a drawer and you can't access years of stored photos and documents. You've tried everything, but nothing connects to your current computer. This converter helps you pull data from old IDE and SATA drives, recover files from damaged storage devices, and transfer everything to your current system.

This adapter connects 2.5 inch and 3.5 inch IDE or SATA hard drives to your computer through a single cable. Plug the power adapter into an outlet, attach your old drive to the matching port, and connect the cable to any open port on your computer. Flip the switch to start accessing your files through your regular file browser.

It transfers data at speeds reaching 5 gigabits per second through the connection. The device supports drives holding up to 6 terabytes of stored information. It runs on multiple operating systems without installing extra software or drivers on your machine.

The hot swap feature lets you disconnect and reconnect drives while your computer stays running. It works with older and newer connection standards for backward compatibility. The 39 inch cable gives you enough length to position drives away from your workspace.

• DUAL INTERFACE SUPPORT: Connects both IDE and SATA drives in 2.5 inch and 3.5 inch sizes for accessing various older storage devices.
  
  
• 5 GBPS TRANSFER SPEED: Moves files at speeds reaching 5 gigabits per second, letting you recover large amounts of data faster than slower connections.
  
  
• 6TB CAPACITY HANDLING: Works with drives storing up to 6 terabytes of information, handling even the largest older hard drives you might need to access.
  
  
• HOT SWAP CAPABILITY: Switch between different drives without restarting your computer, saving time when recovering data from multiple old storage devices at once.
  
  
• CROSS PLATFORM OPERATION: Runs on multiple operating systems including various versions without requiring driver installation, working right after you plug it in.
  
  
• PLUG AND PLAY SETUP: Start accessing files immediately after connecting without installing software, downloading drivers, or configuring complicated settings on your system.
  
  
• 12V POWER SUPPLY: Provides 2 amp power output through the included adapter, giving older drives the electricity they need to spin up and transfer data.
  
  
• 39 INCH CABLE LENGTH: Positions drives away from your workspace with the included meter long cable, keeping your desk clear while recovering important files.

DATA RECOVERY CONVERTER SPECS

• IDE Support: 2.5 and 3.5 inch
  
  
• SATA Support: 2.5 and 3.5 inch
  
  
• Transfer Speed: 5 Gbps
  
  
• Storage Capacity: Up to 6TB
  
  
• Cable Length: 39 inches
  
  
• Power Supply: 12V 2A
  
  
• Hot Swap: Yes

PACKAGE INCLUDES:

• 1 x IDE SATA to USB 3.0 Converter
  
  
• 1 x 12V 2A Power Adapter
  
  
• 1 x USB 3.0 Data Cable
  
  
• 1 x 4 Pin Molex Power Cable