Wire Faster and Safer with These Push In Connectors

You're mid project and twisting wire nuts again and again. Your fingers ache and you're still not sure the connection is tight enough. These connectors let you push wires in once, lock them securely, and test voltage without unwrapping anything during home repairs or panel work.

Insert your stripped wire into the connector opening and push until you hear or feel the internal lock engage. The housing grips solid or stranded wire automatically without twisting or tape. Pull the wire gently to confirm it's locked, then use the external test hole to check voltage with a probe.

Each connector handles wire sizes from 0.08 to 2.5 square millimeters, roughly 28 to 14 AWG. The internal chambers keep each wire path separated and insulated from the other. You can disconnect and reconnect the same unit multiple times across different projects without damaging the mechanism.

The housing stays rigid during insertion and holds both wires in place under normal handling. The test hole sits on the exterior so you can probe live circuits without removing the connector. Each unit weighs 0.03 ounces and works in low voltage electrical setups like lighting circuits, junction boxes, or control panels.

• INTERNAL LOCKING SYSTEM: Grips wire automatically on insertion and holds it firmly without twisting or applying extra pressure manually.
  
  
• DUAL WIRE COMPATIBILITY: Accepts both solid core and stranded wire types in the same connector for mixed wiring tasks.
  
  
• EXTERNAL TEST HOLE: Probe live voltage directly through the housing without disconnecting wires or removing insulation from the connection.
  
  
• REUSABLE DESIGN: Disconnect and reconnect wires multiple times across different jobs without replacing the connector or losing grip strength.
  
  
• WIRE GAUGE RANGE: Handles 0.08 to 2.5 square millimeter wires, covering 28 AWG through 14 AWG for varied applications.
  
  
• SEPARATED WIRE PATHS: Internal chambers isolate each wire from the other preventing shorts and maintaining safe insulation between connections.
  
  
• SINGLE ACTION ENGAGEMENT: Push the wire in once until it locks with no need for twisting, taping, or secondary fastening steps.
  
  
• LOW VOLTAGE RATED: Designed for general low voltage electrical work including lighting circuits, control panels, and junction box installations.

PUSH IN WIRE CONNECTORS SPECS

• Wire Size: 0.08–2.5 mm² (28–14 AWG)
  
  
• Unit Weight: 0.03 ounces
  
  
• Quantity: 100 pieces
  
  
• Type: Double wire push in
  
  
• Application: Low voltage electrical

PACKAGE INCLUDES:

• 100 x Double Wire Push In Connectors